Gouf Custom Bust Completed

Gouf Custom Bust Completed Its done, a quick paint and assembly. It’s not the best build job because I just wanted to get it done. The complete progress for this project is here: Zaku Exceed Head Conversion to Gouf Custom with Bust Source: GameraBaenre’s Blog

Time to Build a Gouf Custom Bust

Time to Build a Gouf Custom Bust Now that I’m done pulling a bunch of casts, time to actually build the the damn thing. The difference is that I’m building and painting up the first 3D printed bust piece which is the bigger bust in 4 major pieces. Since the original 3D Design isn’t the best designed part, when it was printed, […] Source: GameraBaenre’s Blog

Limbo of a post as a catch all of the past few weeks.

Limbo of a post as a catch all of the past few weeks. This is a little bit of a catch up post for the multiple things happening in my life over the past few weeks. I finished casting the Gouf Custom Exceed head conversion kit and bust and those are on sale at the store here. If you are looking to get one, this is your chance. […] Source: GameraBaenre’s Blog

The Gouf Custom Exceed Head Casting Factory

The Gouf Custom Exceed Head Casting Factory Time for a little update on the Gouf Custom Exceed Head conversion kit progress. This has been a fairly productive month, most of the time has been spent making the mold and making casts for all the parts. But time to play some catch up. The last time I left off, I was still working […] Source: GameraBaenre’s Blog

Labor Day Exceed Gouf Update

Labor Day Exceed Gouf Update Slow progress, but I hit a decent milestone at the end of this past weekend with the first session of primer, so it’s time for a post. I have a couple of tool discussions here so this will be good for future reference as well. First up is the drafting compass. We’ve all used these […] Source: GameraBaenre’s Blog

Gouf Custom ver Exceed a 2B and a Commission Project

Gouf Custom ver Exceed a 2B and a Commission Project I haven’t posted an update in a long while since I’ve been extremely lazy in the past few weeks. I’ve been suckered into playing GBGW (Gunpla Battle: Gunpla Warfare) on my damn phone. *cough*E4AKNYNR6*cough*. But that has slowed down because energy recovery at higher levels takes some time, and I’m not giving Bandai any more […] Source: GameraBaenre’s Blog

Zaku Exceed Head Conversion to No Zaku Boy Custom Bust

Zaku Exceed Head Conversion to No Zaku Boy Custom Bust The old adage that if you don’t use it, you’ll lose it; is very true. I did some 3D designs for the Dom Barrage project but once those pieces were designed and printed and I spent more time with the hands-on side of things to finish the build; the 3D design skills flew out the […] Source: GameraBaenre’s Blog

Shirt Reprints!

Shirt Reprints! SCGMC Shirt reprints! We just received our reprints for the Alex Build, Kampfer, and Gunpla Elitist! Folks have been requesting these shirts so here they are! We did a different print style for the Alex Build using ink discharge printing, we also removed the TGG logo from the sleeve; so the first run Alex Build […] Source: GameraBaenre’s Blog

Dom Barrage, last progress post and it’s DONE!

Dom Barrage, last progress post and it’s DONE! As promised, there were only a few last steps for this project. The kit has been broken down into major subsections. Some subsections bigger than others. And I start off with applying some paint chipping using an enamel based metallic grey. A very small brush is used and I just slowly and carefully apply some […] Source: GameraBaenre’s Blog