Dom Barrage Progress Update 2

Dom Barrage Progress Update 2 Progress slowed down a bit because I spent a few days making a mold of a crappy Thai made resin recast of Faye Valentine that a friend of mine picked up back in 2003. The resin is so brittle and ceramic like in texture that it is near impossible to work with and sand. I […] Source: GameraBaenre’s Blog

First new project of the year! 1/100 Dom Barrage

First new project of the year! 1/100 Dom Barrage Feb 1, 2019. I started this immediately after finishing the Dreissen project. Pretty much the same day. I stumbled upon the Dom Barrage, MS-09 F/Br a few years ago and was interested in doing a build of it off the MG Dom. But the reference pictures were pretty lacking and I think I found one […] Source: GameraBaenre’s Blog

Dreissen is Done

Dreissen is Done And a day after the last post, I’m done. I seriously did not think I was going to have this update until at least the end of the week. Dehydrator = time traveling for model building. I filled in some gaps between the 3D printed support piece and the base with more hydrocal and into […] Source: GameraBaenre’s Blog

Dreissen part is 99.9% complete

Dreissen part is 99.9% complete Last we left off, I assessed the project and started on the last bits to finish the damn thing. The chest piece that I melted is painted and back to normal. Another electronics test to make sure all the wire rework didn’t screw anything up. And the whole thing is gloss coated. Since all the […] Source: GameraBaenre’s Blog

New year, Old Project

New year, Old Project Time to kick off the new year with a project. Not necessarily a new project, but something that has been shelved for almost 7 years. I had to dig through my harddrive to find this next set of pictures. Last date from the pictures in this set is April 14, 2012. I originally stopped working […] Source: GameraBaenre’s Blog

Last project of the year, SD VF-1J is done!

Last project of the year, SD VF-1J is done! Going to go back a month and some change to just after SCGMC 2018. At least, that’s when I dropped the photos from my camera to the computer. I had been steadily working on the little project in hopes that I would actually have it done for SCGMC. That didn’t pan out. I kept making […] Source: GameraBaenre’s Blog

Grim Reaper Completed

Grim Reaper Completed She was actually sorta done last Friday… almost. I had some trouble attaching the head since there is quite a bit of resin attached to the head such as her cape/cowl. I originally used a magnet to hold the head in place, but with all the resin bits together, it is too heavy for the […] Source: GameraBaenre’s Blog

SCGMC 2018 come and gone!

SCGMC 2018 come and gone! I’m still recovering from the event, but it was a damn fun time. I met a ton of new folks and got to see lots of familiar faces. For those that want to skip to all 240 entries.. yes, there were 240 ENTRIES by 116 entrants, the gallery link is here: SCGMC 2018 Gallery This […] Source: GameraBaenre’s Blog

SD Valkyrie VF-1J

SD Valkyrie VF-1J The group of us had a TGG Live broadcast two Saturday’s ago and I was in the midst of finishing the Death kit so I really didn’t have anything to work on, so I cracked open this little kit I picked up from Hong Kong the last time I went back. It is a recast […] Source: GameraBaenre’s Blog

Grim Reaper Part 3

Grim Reaper Part 3 Seven months after my last post on the subject; it is time to get around to finishing the damn project. So let us catch up. Here is a mockup of Death right about the end of March as I continued working on masking and painting. I had pictures and progress in the can when I […] Source: GameraBaenre’s Blog