Completed Build 9: Mad Max Bear Base Kit: HG Bearguy | HG Petiteguy Mods: Petiteguy added to the Bearguy chest cavity, tons of added armor detail, custom built backpack and face mask, custom base Awards: Bestest Bearguy and 1st place 1/144 AU @ SCGMC 2018, 2nd Place 1/144 Gundam @ Spruefest, Bronze 1/144 Gundam at Valleycon Source: Freddy Was Wrong
RX-78 Gundam Exceed Model Head DONE!
RX-78 Gundam Exceed Model Head DONE! This is easily one of my quickest projects to complete in the past 10 or so years. The tough part was figuring out how to take the damn thing apart, and you can check out the disassembly video here: Naturally, I need to add lights to the thing so I built a light setup for […] Source: GameraBaenre’s Blog
Tearing down the Gundam Exceed Model Head
Tearing down the Gundam Exceed Model Head This past weekend, I saw a FB post from one of my local shops (Neo Happy Land Co) saying they had the RX-78 Gundam Exceed Heads in stock. They’re selling them there for $10. Which isn’t too bad a markup being that they’re gashapon items from Japan. I have a few of the Zaku Exceed […] Source: GameraBaenre’s Blog
Dom Barrage Progress Update 2
Dom Barrage Progress Update 2 Progress slowed down a bit because I spent a few days making a mold of a crappy Thai made resin recast of Faye Valentine that a friend of mine picked up back in 2003. The resin is so brittle and ceramic like in texture that it is near impossible to work with and sand. I […] Source: GameraBaenre’s Blog
First new project of the year! 1/100 Dom Barrage
First new project of the year! 1/100 Dom Barrage Feb 1, 2019. I started this immediately after finishing the Dreissen project. Pretty much the same day. I stumbled upon the Dom Barrage, MS-09 F/Br a few years ago and was interested in doing a build of it off the MG Dom. But the reference pictures were pretty lacking and I think I found one […] Source: GameraBaenre’s Blog
Dreissen is Done
Dreissen is Done And a day after the last post, I’m done. I seriously did not think I was going to have this update until at least the end of the week. Dehydrator = time traveling for model building. I filled in some gaps between the 3D printed support piece and the base with more hydrocal and into […] Source: GameraBaenre’s Blog
Dreissen part is 99.9% complete
Dreissen part is 99.9% complete Last we left off, I assessed the project and started on the last bits to finish the damn thing. The chest piece that I melted is painted and back to normal. Another electronics test to make sure all the wire rework didn’t screw anything up. And the whole thing is gloss coated. Since all the […] Source: GameraBaenre’s Blog
New year, Old Project
New year, Old Project Time to kick off the new year with a project. Not necessarily a new project, but something that has been shelved for almost 7 years. I had to dig through my harddrive to find this next set of pictures. Last date from the pictures in this set is April 14, 2012. I originally stopped working […] Source: GameraBaenre’s Blog
Last project of the year, SD VF-1J is done!
Last project of the year, SD VF-1J is done! Going to go back a month and some change to just after SCGMC 2018. At least, that’s when I dropped the photos from my camera to the computer. I had been steadily working on the little project in hopes that I would actually have it done for SCGMC. That didn’t pan out. I kept making […] Source: GameraBaenre’s Blog
Grim Reaper Completed
Grim Reaper Completed She was actually sorta done last Friday… almost. I had some trouble attaching the head since there is quite a bit of resin attached to the head such as her cape/cowl. I originally used a magnet to hold the head in place, but with all the resin bits together, it is too heavy for the […] Source: GameraBaenre’s Blog